Connecting Apache httpd to Tomcat with mod_jk: The bare minimum
December 9, 2011 freesoftware, General, work 3 CommentsEarlier this week, I wrote:
I hate docs that tell you what to do, but not why. As soon as a package name or path changes, you’re dust. This is maybe the 4th time I’ve been configuring Apache to delegate stuff to Tomcat using mod_jk, and every time is just like the first.
For those who don’t know, mod_jk is a module inplementing the wire protocol AJP/13, which allows a normal HTTP web server to forward on certain requests to a second server. In this case, we want to forward requests for JSP pages and servlets to Tomcat 6. This allows you to do neat things like serve static content with Apache and only forward on the dynamic Java stuff to Tomcat. The user sees a convenient URL (no port :8080 on the hostname) and the administrator gets to serve multiple web scripting languages on the same server, or load balance requests for Java server resources across several hosts.
I have spent enough time on it at this point, I think, that I understand all of the steps in the process, and have stripped it down to the bare minimum that one would need to do in terms of configuration to get things working. And so I’m putting my money where my mouth is, and this is my attempt to write a nice explanation of how mod_jk does its thing, and how to avoid some of the common mistakes I had.
First, a remark: Apache is one of those pieces of software that has gotten harder, rather than easier, to configure as time has gone on. Distributions each package it differently, with different “helpful” mechanisms that make common tasks like enabling a module easier, and to enable convenient packaging of modules like PHP, independent of the core package. But the overall effect is that a lot of magic done by distributions makes it much harder to follow the upstream documentation. Config files are called different names, or stored in different places. Different distributions handle the inclusion of config file snippets differently. And so on.
This is not to say that Apache, Tomcat and mod_jk don’t have some nice docs – they do, but often the docs don’t correspond to the distros, or haven’t been updated in a while, and often they don’t explain why you have to do something, putting emphasis instead on what you need to do. After all my reading, I finally found the Holy Grail I was looking for – the simple document of how to configure mod_jk – but even this has its shortcomings. The article doesn’t mention Tomcat, for example, which left me digging around for information on the configuration I needed to do to Tomcat, which led me to this, which led me to over-write the sample workers.properties file in the simple set-up document.
But if you understand the First Principles, you can figure out what’s going on with any organisation of configuration. That’s what I’m hoping to get across here.
How does mod_jk do its thing?
The first issue I had trouble getting my head around was how, exactly, all this was supposed to work. In particular, I didn’t quite understand how the configuration worked on the Tomcat size of things.
As I understand it, here’s what happens:
- A GET request comes in to httpd for http://localhost/examples/jsp/num/numguess.jsp
- Apache processes the request, and find a matching pattern for the URL among JkMount directives
- Apache then reads the file specified by the JkWorkersFile option to figure out what to do with the request. Let’s say that config file says to forward to localhost:8009 using the protocol ajp13
- Tomcat has a Connector listening on port 8009, with the protocol AJP/13, which handles the request and replies on the wire. Apache httpd sends the reply back to the client
Apache httpd configuration
There are two steps to configuring Apache:
- Enabling the module
- Configuring mod_jk
Apache provides a handy utility called “a2enmod” which will enable a module for you, once it’s installed. What happens behind the scenes for modules depends on the distribution. On Ubuntu, module load instructions are put in a file called /etc/apache2/mods-available/<module>.load optionally alongside a sample configuration file /etc/apache2/mods-available/<module>.conf. To enable the module, you create a symlink to the .load file in /etc/apache2/mods-enabled.
On my Ubuntu laptop, my jk.load contains:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
On OpenSuse, on the other hand, a line similar to this is explicitly added to the file /etc/apache2/sysconfig.d/loadmodule by sysconfig, based on the contents of a field in the configuration file /etc/sysconfig/apache2 – remember how I said that distro packaging makes things harder? If you added the line directly to the loadmodule file, the change would be lost the next time Apache restarts.
In both cases, these files (on Ubuntu, the mods-available/*.load files, and on OpenSuse the sysconfig.d/* files) are loaded by the main Apache config file (httpd.conf) at start-up.
Configuring mod_jk
The minimum configuration that mod_jk needs is a pointer to a Workers definition config file (JkWorkersFile). Other useful configuration options are a path to a log file (JkLogFile – which should be writable by the user ID which owns the httpd process) and a desired log level – I set JkLogLevel to “debug” while getting things set up. On OpenSuse, I also needed to set JkShmFile, since for the default file location (/srv/www/logs/jk-runtime-status) the directory didn’t exist and wasn’t writable by wwwrun, the user that owns the httpd process.
This configuration, and the configuration of paths below, is usually in a separate config file – in both Ubuntu and OpenSuse, it’s jk.conf in /etc/apache2/conf.d (files ending in .conf in this directory are automatically parsed at start-up). To avoid errors in the case where mod_jk is not present or loaded, you can surround all Jk directives with an “<IfModule mod_jk.c>…</IfModule>” check if you’d like.
The JkMount directive configures what will get handled by which worker (more on workers later). It takes two arguments: a path, and the name of the worker to handle requests matching the path. Unix wildcards (globs) are accepted, so
JkMount /examples/*.jsp ajp13_worker
will match all files under /examples ending in .jsp and will pass them off to the ajp13_worker worker.
If you want Apache to serve any static content under your webapps, you’ll also need either a Directory or Alias entry to handle them. Putting together with the previous section, the following (from Ubuntu) was the jk.conf file I used to pass the handling of JSPs and servlets off to Tomcat, and serves static stuff through Apache:
<IfModule mod_jk.c>
JkWorkersFile /etc/libapache2-mod-jk/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel debug
Alias /examples /usr/share/tomcat6-examples/examples
JkMount /examples/*.jsp ajp13_worker
JkMount /examples/servlets/* ajp13_worker</IfModule>
I should use Directory to prevent Apache from serving anything it shouldn’t, like Tomcat config files under WEB-INF – I could also just use “JkMount /examples/* ajp13_worker” to have everything handled by Tomcat.
Now that Apache’s config is done, we need to configure mod_jk itself, via the workers.properties file we set in the JkWorkersFile parameter.
workers.properties
Sample workers.properties files contain a lot of stuff you probably don’t need. The basic, unavoidable parameters you will need are the name of a worker (which you’ve already used as the 2nd argument for JkMount above), and a hostname and port to send requests to, and a protocol type (there are several options for worker type besides AJP/1.3 – “lb” for “load balancer” is the most important to read up on). For the above jk.conf, the simplest possible workers.properties file is:
worker.list=ajp13_worker
worker.ajp13_worker.port=8009
worker.ajp13_worker.host=localhost
worker.ajp13_worker.type=ajp13
And that’s it! The last step is to set up Tomcat to handle AJP 1.3 requests on port 8009.
Configuring Tomcat
In principle, Tomcat doesn’t need to know anything about mod_jk.It just needs to know that requests are coming in on a given port, with a given protocol.
Typically, an AJP 1.3 connector is already defined in te default server.xml (in /usr/tomcat6 on both Ubuntu and OpenSuse) when you install Tomcat. The format of the connector configuration is:
<Connector port=”8009″ protocol=”AJP/1.3″ redirectPort=”8443″ />
I am pretty sure that this will work without the redirectPort option, but I haven’t tried it. It basically allows requests received with security constraints specifying encryption to be handled over SSL, rather than unencrypted.
In addition to this, Tomcat does provide a facility to auto-create the appropriate mod_jk configuration on the fly. To do so, you need to specify an ApacheConfig in the Tomcat connector, and point it at the workers.properties file. This facility looks pretty straightforward, but I know I found it confusing in the past when I lost edits to the jk.conf file – I prefer manual configuration myself.
Gotchas
I have had quite a few gotchas while figuring all this out – I may as well share for the benefit of future people having the same problems.
- All the documentation for mod_jk installedd with the packages refers to Tomcat5 paths – for example, on OpenSuse, in the readme, I was asked to copy workers.config into /etc/tomcat5/base – a directory which doesn’t exist (even when you change the 5 to a 6)
- If your apache web server uses virtual hosts (and, on Ubuntu, it does by default) then JkMounts are not picked up from the global configuration file! You need to either add “JkMountCopy true” to the VirtualHost section, or have JkMounts per VirtualHost. If you used Alias as I did above, and you try to run a servlet, the error message is just a 404. If you try to load a JSP, you will see the source.
- If you make a mistake in your workers.property file (I had a typo “workers.list=ajp13_worker” for several hours) and your worker name is not found in a “worker.list” entry, you will see no error message at all with warnings set to error or info. With the warning level set to debug, you will see the error message “jk_translate::mod_jk.c (3542): no match for /examples/ found” The chances are you have a typo in either your jk.conf file (check that the name of the worker corresponds to the name you use in workers.properties), or you have a typo somewhere in your workers.properties file (is it really work.list? Does the worker name match? Is it the same as the worker name in the .host, .port and .type configuration?
- Make sure you get Tomcat working correctly first and working perfectly on port 8080 – or you won’t know whether errors you’re seeing are Tomcat errors, Apache errors or mod_jk errors.
I’m sure I’ve made mistakes and forgotten important stuff – I’m happy to get feedback in the comments.
