Felt it been to long since I did another Fedora Workstation update. We spend a lot of time trying to figure out how we can best spend our resources to produce the best desktop possible for our users, because even though Red Hat invests more into the Linux desktop than any other company by quite a margin, our resources are still far from limitless. So we have a continuous effort of asking ourselves if each of the areas we are investing in are the right ones that give our users the things they need the most, so below is a sampling of the things we are working on.
Improving integration of the NVidia binary driver
This has been ongoing for quite a while, but things have started to land now. Hans de Goede and Simone Caronni has been collaboring, building on the work by NVidia and Adam Jackson around glvnd. So if you set up Simones NVidia repository hosted on negativo17 you will be able to install the Nvidia driver without any conflicts with the Mesa stack and due to Hans work you should be fairly sure that even if the NVidia driver stops working with a given kernel update you will smoothly transition back to the open source Nouveau driver. I been testing it on my own Lenovo P70 system for the last week and it seems to work well under X. That said once you install the binary NVidia driver that is what your running on, which is of course not the behaviour you want from a hybrid graphics system. Fixing that last issue requires further collaboration between us and NVidia.
Related to this Adam Jackson is currently working on a project he calls glxmux. glxmux will allow you to have more than one GLX implementation on the system, so that you can switch between Mesa GLX for the Intel integrated graphics card and NVidia GLX for the binary driver. While we can make no promises we hope to have the framework in place for Fedora Workstation 27. Having that in place should allow us to create a solution where you only use the NVidia driver when you want the extra graphics power which will of course require significant work from Nvidia to enable it on their side so I can’t give a definite timeline for when all the puzzle pieces are in place. Just be assured we are working on it and talking regularly to NVidia about it. I will let you know here as soon as things come together.
On the Wayland side the Jonas Ådahl is working on putting the final touches on Hybrid Graphics support
Fleet Commander ready for take-off
Another major project we been working on for a long time in Fleet Commander. Fleet Commander is a tool to allow you to manage Fedora and RHEL desktops centrally. This is a tool targeted at for instance Universities or companies with tens, hundreds or thousands of workstation installation. It gives you a graphical browser based UI (accessible through Cockpit) to create configuration profiles and deploy across your organization. Currently it allows you to control anything that has a gsetting associated with it like enabling/disabling extensions and setting configuration settings in GTK+ and GNOME applications. It allows you to configure Network Manager settings so if your updating the company VPN or proxy settings you can easily push those changes out to all user in the organization. Or quickly migrate Evolution email settings to a new email server. The tool also allows you to control recommended applications in the Software Center and set bookmarks in Firefox. There is also support for controlling settings inside LibreOffice.
All this features can be set and controlled on either a user level or a group level or organization wide due to the close integration we have with FreeIPA suite of tools. The data is stored inside your organizations LDAP server alongside other user information so you don’t need to have the clients connect to a new service for this, and while it is not there in this initial release we will in the future also support Active Directory.
The initial release and Fleet Commander website will be out alongside Fedora Workstation 26.
I talked about PipeWire before, when it was still called Pinos, but the scope and ambition for the project has significantly changed since then. Last time when I spoke about it the goal was just to create something that could be considered a video equivalent of pulseaudio. Wim Taymans, who you might know co-created GStreamer and who has been a major PulseAudio contributor, has since expanded the scope and PipeWire now aims at unifying linux Audio and Video. The long term the goal is for PipeWire to not only provide handling of video streams, but also handle all kinds of audio. Due to this Wim has been spending a lot of time making sure PipeWire can handle audio in a way that not only address the PulseAudio usecases, but also the ones handled by Jack today. A big part of the motivation for this is that we want to make Fedora Workstation the best place to create content and we want the pro-audio crowd to be first class citizens of our desktop.
At the same time we don’t want to make this another painful subsystem transition so PipeWire so we will need to ensure that PulseAudio applications can still be run without modification.
We expect to start shipping PipeWire with Fedora Workstation 27, but at that point only have it handle video as we need this to both enable good video handling for Flatpak applications through a video portal, but also to provide an API for applications that want to do screen capture under Wayland, like web browser applications offering screen sharing. We will the bring the audio features onboard in subsequent releases as we also try to work with the Jack and PulseAudio communities to make this a joint effort. We are also working now on a proper website for PipeWire.
Red Hat developer integration
A feature we are quite excited about is the integration of support for the Red Hat developer account system into Fedora. This means that you should be able to create a Red Hat developer account through GNOME Online accounts and once you have that account set up you should be able to easily create Red Hat Enterprise Linux virtual machines or containers on your Fedora system. This is a crucial piece for the developer focus that we want the workstation to have and one that we think will make a lot of developers life easier. We where originally hoping to have this ready for Fedora Workstaton 26, but atm it looks more likely to hit Fedora Workstation 27, but we will keep you up to date as this progresses.
Fractional scaling for HiDPI systems
Fedora Workstation has been leading the charge in supporting HiDPI on Linux and we hope to build on that with the current work to enable fractional scaling support. Since we introduced HiDPI support we have been improving it step by step, for instance last year we introduced support for dealing with different DPI levels per monitor for Wayland applications. The fractional scaling work will take this a step further. The biggest problem it will resolve is that for certain monitor sizes the current scaling options either left things to small or to big. With the fractional scaling support we will introduce intermediate steps, so that you can scale your interface 1.5x times instead of having to go all the way to 2. The set of technologies we are developing for handling fractional scaling should also allow us to provide better scaling for XWayland applications as it provides us with methods for scaling that doesn’t need direct support from the windowing system or toolkit.
GNOME Shell performance
Carlos Garnacho has been doing some great work recently improving the general performance of GNOME Shell. This comes on top of his earlier performance work that was very well received. How fast/slow GNOME shell is often a subjective thing, but reducing overhead where we can is never a bad thing.
Owen Taylor has been working hard on putting the pieces in place for start large scale Flatpak building in Fedora. You might see a couple of test flatpaks appear in a Fedora Workstation 26 timeframe, but the goal is to have a huge Flatpak catalog ready in time for Fedora Workstation 27. Essentially what we are doing is making it very simple for a Fedora maintainer to build a Flatpak of the application they maintain through the Fedora package building infrastructure and push that Flatpak into a central Flatpak registry. And while of course this is mainly meant to be to the benefit of Fedora users there is of course nothing stopping other distributions from offering these Flatpak packaged applications to their users also.
Another effort that is marching forward is what we call Atomic Workstation. The idea here is to have an immutable OS image kinda like what you see on for instance Android devices. The advantage to this is that the core of the operating system gets tested and deployed as a unit and the chance of users ending with broken systems decrease significantly as we don’t need to rely on packages getting applied in the correct order or scripts executing as expected on each individual workstation out there. This effort is largely based on the Project Atomic effort, and the end goal here is to have a image based OS install and Flatpak based applications on top of it. If you are very adventerous and/or want to help out with this effort you can get the ISO image installer for Atomic Workstation here.
Our Linux Firmware project is still going strong with new features being added and new vendors signing on. As Richard Hughes recently blogged about the latest vendor joining the effort is Logitech who now will upload their firmware into the service so that you can keep your Logitech peripherals updated through it. It is worthwhile pointing out here how we worked with Logitech to make this happen, with Richard working on the special tooling needed and thus reducing the threshold for Logitech to start offering their firmware through the service. We have other vendors we are having similar discussions and collaborations with so expect to see more. At this point I tend to recommend people get a Dell to run Linux, due to their strong support for efforts such as the Linux Firmware Service, but other major vendors are in the final stages of testing so expect more major vendors starting to push firmware updates soon.
High Dynamic Range
The next big thing in the display technology field is HDR (High Dynamic Range). HDR allows for deeper more vibrant colours and is a feature seen on a lot of new TVs these days and game consoles like the Playstation 4 support it. Computer monitors are appearing on the market too now with this feature, for instance the Dell UP2718Q. We want to ensure Fedora and Linux is a leader here, for the benefit of video and graphics artists using Fedora and Red Hat Enterprise Linux. We are thus kicking of an effort to make sure this technology mature as quickly as possible and be fully supported. We are not the only ones interested in this so we will hopefully be collaborating with our friends at Intel, AMD and NVidia on this. We hope to have the first monitors delivered to our office within a few weeks.
While playback these days have moved to streaming where locally installed codecs are of less importance for the consumption usecase, having a wide selection of codecs available is still important for media editing and creation usecases, so we want you to be able to load a varity of old media files into you video editor for instance. Luckily we are at a crossroads now where a lot of widely used codecs have their essential patents expire (mp3, ac3 and more) while at the same time the industry focus seems to have moved to royalty free codec development moving forward (Opus, VP9, Alliance for Open Media). We have been spending a lot of time with the Red Hat legal team trying to clear these codecs, which resulted in mp3 and AC3 now shipping in Fedora Workstation. We have more codecs on the way though, so this effort is in no way over. My goal is that over the course of this year the situation of software patents being a huge issue when dealing with audio and video codecs on Linux will be considered a thing of the past. I would like to thank the Red Hat legal team for their support on this issue as they have had to spend significant time on it as a big company like Red Hat do need to do our own due diligence when it comes to these things, we can’t just trust statements from random people on the internet that these codecs are now free to ship.
We been looking at this for a while now and hope to be able to start sharing information with users on which laptops they should get that will have good battery life under Fedora. Christian Kellner is now our point man on battery life and he has taken up improving the Battery Bench tool that Owen Taylor wrote some time ago.
We will have a new version of the QtGNOME platform in Fedora 26. For those of you who have not yet heard of this effort it is a set of themes and tools to ensure that Qt applications runs without any major issues under GNOME 3. With the new version the theming expands to include the accessibility and dark themes in Adwaita, meaning that if you switch to one of these themes under GNOME shell it will also switch your Qt applications over. We are also making sure things like cut’n paste and drag and drop works well. The version in Fedora Workstation 26 is a big step forward for this effort and should hopefully make Qt applications be first class citizens under your Fedora Workstation desktop.
Ever since we switched the default to Wayland we have kept the pressure up and kept fixing bugs and finding solutions for corner cases. The result should be an improved Wayland experience in Fedora Workstation 26. A big thanks for Olivier Fourdan, Jonas Ådahl and the whole Wayland community for their continued efforts here. Two major items Jonas is working on for instance is improving fractional scaling, to ensure that your desktop scales to an optimal size on HiDPI displays of various sizes. What we currently have is limited to 1x or 2x, which is either to small or to big for some screens, but with this work you can also do 1.5x scaling. He is also working on preparing an API that will allow screen sharing under Wayland, so that for instance sharing your slides over video conferencing can work under Wayland.